Your 2.5 GbE adapter is probably fine if the link is up but shared computers do not appear. Start by switching the Ethernet network to Private. Then turn on Network discovery and File and printer sharing. Also make sure discovery services and firewall rules are not blocking Windows browsing.
What it usually means when the adapter is connected but shared computers do not appear
If the cable is live and File Explorer’s Network view is empty, Windows is usually on the LAN but cannot discover other PCs. That can happen when the network is marked Public, discovery is off, a required service is stopped, firewall rules are too strict, or the router or access point is isolating clients.
This is different from a basic internet problem. Web access can work while shared folders, shared PCs, and network browsing stay hidden.
Before you start
Use a trusted home or office network for the checks below. If this is a work-managed PC, some sharing settings may be controlled by policy, so local changes may not stick.
Before you change drivers or reset the network, check these items in order:
- The Ethernet link is up and the adapter is connected.
- The PC is on the right wired network, not a guest network.
- You can reach at least one other device on the same LAN by IP address if you already know it.
If the issue only affects browsing and shared computers, do the discovery checks first. A network reset can help some Windows Ethernet problems and some cases where you can reach the internet but not shared network drives. It is not the first thing I’d reach for here.
Check the network profile first
Start with the network profile. A wired connection set to Public often hides discovery, even when the cable and internet connection are fine.
- Open Settings and go to the Ethernet network profile.
Settings > Network & internet > Ethernet > Network profile- Change the profile to
Privateif this is a trusted network. - Reopen File Explorer and check
Networkagain.
If the profile was already Private and nothing changed, move on. Toggling it back and forth usually just adds confusion.
Turn on Network discovery and File and printer sharing
Next, turn on the sharing settings for the profile you are actually using. Windows keeps separate settings for Private and Public networks, so it is easy to enable the wrong one and miss the real problem.
- Open Advanced sharing settings.
Control Panel > Network and Internet > Network and Sharing Center > Change advanced sharing settings- In the
Privateprofile, turn onNetwork discovery. - In the same profile, turn on
File and printer sharing. - Leave the
Publicprofile alone unless you truly need sharing there.
If the shared computers appear after this, the problem was Windows discovery, not the adapter. If they still do not appear, keep going.
Make sure the discovery services are running
Windows discovery depends on background services. If these are stopped, the network list can stay blank even though the adapter has a live link.
Check Function Discovery Provider Host and Function Discovery Resource Publication. Those services help Windows find and publish shared devices on the network.
- Open the Services console.
- Find
Function Discovery Provider Host. - Confirm it is running.
- Find
Function Discovery Resource Publication. - Confirm it is running.
If one of them is stopped, start it and see whether the shared computers appear after a refresh. If your system policy blocks that change, stop there and check the PC’s management settings instead of forcing it.
Check firewall or security software rules that can block discovery
Firewall rules can block discovery traffic while still allowing internet access. Windows Defender Firewall and third-party security software can do that.
Do not turn the firewall off for long periods. Instead, check whether discovery and file sharing are allowed on the current profile. If you use security software that manages its own firewall, check its rules too.
A good sign that this is the issue is simple: the PC can browse the web, but shared computers stay hidden until the discovery or file-sharing rule is allowed. If the list changes right after a firewall rule change, you have found the block. Put the setting back if you only changed it for testing.
Look for router or access-point isolation
If Windows settings look right and the list is still empty, check the router or access point. Guest mode, client isolation, AP isolation, or VLAN isolation can keep devices on the same physical network from seeing one another.
A common case is a PC that can browse the web but cannot browse shares on another device because the router is separating clients. Guest Wi‑Fi is a frequent place to find that behavior.
If you control the router, check whether client isolation or guest isolation is enabled on the port or SSID your PC uses. If you do not control it, ask whoever manages the network before changing anything on the PC again.
How to tell whether the issue is Windows discovery or the other computer
Once you have checked the local Windows settings, the next question is whether the problem lives on this PC or on the other one.
If one PC can see the share and this one cannot, compare the two machines. When the same shared folder is visible on one system and not the other, the failing PC usually has a local discovery, firewall, or name-resolution problem.
Suspect the other computer instead when:
- Its sharing is turned off.
- Its firewall blocks SMB or discovery.
- Its network profile is Public.
- The folder was never actually shared.
If the other PC cannot be found by any device, the issue is probably on that machine, not on your 2.5 GbE adapter.
How to verify the fix without guessing
After each change, refresh the result instead of assuming it worked.
- Open File Explorer and select
Network. - Refresh it or close and reopen File Explorer.
- Check whether the shared computer appears.
- Open the shared computer by name if it shows up.
- If the name still fails, try the device’s IP address in the address bar.
If the computer appears by IP but not by name, the adapter is not the problem. That usually means discovery or name resolution still needs work. If it appears by name and the shared folders open, the fix worked.
If you still cannot see anything after all of the checks above, a network reset can help some Windows Ethernet problems and some cases where you can reach the internet but not shared network drives. After a reset, Windows reinstalls the adapters and returns their settings to defaults, so use it only after you have checked the simpler sharing and discovery settings first.
Conclusion
If the adapter is connected but shared computers are missing, keep working through the Windows discovery checks before you blame the hardware. If the problem survives those checks, look at the other PC or the router isolation settings next.
Frequently Asked Questions
Why can internet work while shared computers don’t appear?
Because internet access and LAN discovery are separate. The adapter can carry normal traffic while Windows discovery, firewall rules, or router isolation still block File Explorer from listing shared computers.
Should I reinstall the adapter driver first?
Usually no. If the adapter connects and internet works, start with the network profile, discovery settings, services, and firewall rules. Driver changes are later steps unless Device Manager shows an actual adapter error.
Sources
- Fix Ethernet connection problems in Windows | Microsoft Support (support.microsoft.com)