Advertisement

Google Nest Wifi reconnect after firmware update: what’s normal

Yes, a reconnect after a Google Nest Wifi firmware update can be normal. The key is telling a routine reboot from a mesh rejoin problem, then fixing the network in the safest order without jumping straight to a reset.

Networking 7 min read

Yes, a reconnect after a Google Nest Wifi firmware update can be normal. That can happen if the router or one point rebooted and a device kept an old Wi‑Fi session. The first fix is usually a clean reboot of the modem, Nest Wifi router, and any point that dropped off, not a full reset. If one point still will not rejoin after that, remove and add only that point again.

Is a reconnect after the update normal?

Yes, sometimes it is. A firmware update can restart the router or a mesh point. Some phones, laptops, TVs, printers, or smart-home devices then need to reconnect before they behave normally again.

What I treat as normal is a short outage, a point that disappears briefly, or a client device that comes back after a fresh join. What is not normal is having to rebuild the whole network or factory reset everything just because the update finished.

A quick way to think about it:

What looks wrongWhat it usually means
Every device lost internetModem, router, or ISP problem
Only one Nest point is missing or weakMesh point or backhaul problem
Only a few devices fail to joinClient device reconnect problem

That split matters. The update may have finished cleanly and still left one device with stale Wi‑Fi state. That can feel like a network failure even when the mesh itself is fine.

What actually got disconnected

The same update can affect different layers of the setup. The router may have restarted normally while one point lost its link to the main unit. Or the network may be fine while a device still clings to the old wireless session.

Use the symptoms to narrow it down:

  • If the Google Home app shows the network is back but every device is offline, suspect the modem or ISP before you suspect Nest Wifi.
  • If the app shows the main network but one point is missing, offline, or weak, treat it as a node problem.
  • If only one or two devices fail to join, treat it as a client device problem.

The important clue is scope. A whole-home outage points you toward the modem path. A single missing point points toward mesh rejoin. A stubborn phone, printer, or TV usually means that device needs to forget and rejoin the network, not that the whole mesh is broken.

Before you start

Work from the outside in, and don’t reset anything yet.

  • Check whether other devices still have internet.
  • Look in the Google Home app and see whether the router and points show online.
  • Make sure the modem is powered on and has had time to come fully online.
  • Stop here if the network comes back after a normal reboot cycle; you do not need to re-add points just because the app lagged for a minute.

If the problem started right after the firmware update, give the network a few minutes to settle before you touch settings. In practice, a delayed app refresh can make a healthy system look broken.

The safest recovery order

Follow this order so you do not chase the wrong problem. It starts with the modem, then the router, then the point that dropped off. That keeps a modem-side glitch from looking like a Nest Wifi fault.

  1. Unplug the modem and the Google Nest Wifi router.
  1. Wait 10 to 20 seconds for it to fully power off.
  1. Plug the modem back in first and wait for it to come fully online.
  1. Plug the Nest Wifi router back in next and wait for the app and lights to settle.
  1. Leave any Nest point powered on and see whether it rejoins on its own.
  1. Test the device that was failing before, not just a random phone that was already working.

If the internet comes back after the modem and router reboot, stop there. If the app shows the network healthy again, you usually do not need to change mesh settings.

You can also restart your router or points in the Google Home app. Open the router or point. Tap Settings. Then tap Restart Network. Your device will restart and maintain your settings and data.

When one point will not rejoin

If one Nest point still will not rejoin after the reboot path above, that is when removing and adding only that point again makes sense. I would not remove the whole network unless the router itself is the part that failed.

Try these checks first:

  • Power-cycle the point and wait for it to come back.
  • Move it closer to the main router for the rejoin attempt.
  • Confirm the modem and main router are already stable.
  • Give the app a few minutes to update, since point status can lag behind reality.

If the point stays offline, keeps showing weak mesh status, or never rejoins after being moved closer and restarted, remove and re-add that point. That is a narrower fix than a factory reset and avoids disturbing the rest of the network.

If the point is simply slow to come back, wait. If it never comes back, remove and re-add that one point. If the whole network keeps failing, stop trying to rescue the point and go back to the modem or ISP path.

How to confirm it’s really fixed

The fix is holding when the app shows the router and points online, the network is back to normal status, and the device that was failing reconnects and stays connected.

Check the Google Home app for the main router first, then each point. A healthy-looking app is not enough by itself, though, because it can briefly lag behind the real network state. I always test the device that failed before, because that is the one most likely to expose a stale connection.

If the app says the update completed but the internet still drops across multiple devices, suspect the modem or ISP instead of Nest Wifi. If the modem keeps losing sync, or the whole home loses internet again after a clean reboot order, that is when I would contact the ISP or check the modem directly.

Frequently Asked Questions

Do I need to factory reset Google Nest Wifi after a firmware update?

Usually no. Start with a clean reboot of the modem, router, and any point that dropped off. Factory reset is for the rare case where the network still will not stabilize after those safer steps.

Why does one device reconnect and another one won’t?

That is common. A phone or laptop may refresh its Wi‑Fi session quickly, while a printer, TV, or smart-home device can hold onto old network state and need a manual reconnect. The mesh can be fine even when one client is stuck.

Should I remove a Nest point if it shows offline in the app?

Only after a reboot and a closer rejoin attempt have failed. If the point is just slow to report back, wait a few minutes. Remove and re-add it when it clearly will not rejoin on its own.

Sources