Advertisement

TP-Link Deco Loses Internet After Modem Restart

If your Deco still shows local Wi‑Fi but drops internet right after the modem restarts, the problem is usually the modem handoff, not the mesh itself. This article walks through the exact checks and power-up order that often bring WAN back.

Networking 2 min read
A TP-Link Deco mesh router sits on a shelf in a home interior.

If your TP-Link Deco still works on local Wi‑Fi but loses internet every time the modem restarts, the problem is usually the modem-to-ISP handoff, not the mesh radio itself. The fastest fix is to check the modem’s WAN/online state first. Then bring the modem fully online before the Deco main node tries to grab a fresh internet lease. If that only works after a full power-off wait, you’re likely dealing with a stale DHCP lease, PPPoE session, MAC binding, or modem firmware/ISP handoff issue rather than a bad Deco node.

When the evidence points away from Deco

The case points away from Deco when the main node still builds a local Wi‑Fi network. It also points away from Deco if the modem fails to come back cleanly after a restart. Another sign is when the internet only returns after a long power-off wait that clears session state.

That pattern usually means the break is on the modem side or in the ISP handoff. It can also mean the modem-router combo is not in the mode you expected. Check whether the WAN status in the Deco app ever gets a fresh address after reboot. Also see whether another device can go online directly from the modem while the Deco cannot.

If those signs line up, stop treating it like a mesh problem. Check the modem’s current firmware status, the ISP’s current handoff requirements, and whether bridge mode or MAC binding is involved for your line. Those details change by model and provider, so use the current official modem and ISP documentation before making a deeper change.