If two laptops on the same TP-Link Deco mesh get different speeds, the usual cause is that they are not really making the same connection, even if they show the same network name. One may be on a different band, a different Deco node, or a weaker backhaul path, and the slower laptop may also have older Wi‑Fi hardware, weaker antennas, or a bad driver. Start by testing both laptops the same way and checking what each one is actually connected to before you change any Deco setting.
Start with the most likely reason the speeds differ
The gap is usually about connection quality, not a broken Deco system. In practice, I first look for one laptop landing on 2.4 GHz while the other stays on 5 GHz or 6 GHz, one laptop roaming to a different node, or the slower machine using an older adapter that simply cannot keep up.
Background activity can make the difference look bigger than it really is. Cloud sync, game launchers, updates, a VPN, or a security scan can all distort a speed test, so a bad result is not proof that the mesh is at fault.
If both laptops are tested fairly and one is still slower, that’s when the diagnosis becomes useful: either the slower laptop is the limit, the room or node choice is the problem, or the Deco side needs attention.
Before you start
- Use the same SSID on both laptops, and make sure both are connected to the same Deco system.
- Put both laptops in the same room for the first test, ideally side by side.
- Close or pause downloads, cloud sync, VPNs, game launchers, and anything else that can use the connection in the background.
- Restart the slower laptop if it has been sleeping for a long time or has not had a recent driver update.
- If you plan to change Deco settings, change only one thing at a time so you can back out cleanly if the result gets worse.
How to test both laptops fairly so the result is comparable
- Place both laptops next to each other in the same room.
- Connect both to the same Deco Wi‑Fi network name.
- Confirm that no big downloads, sync jobs, or VPNs are running on either laptop.
- Run the same speed test on both machines at about the same time.
- Repeat the test once or twice after a short pause instead of trusting a single result.
- Move both laptops to the room where the slowdown is noticed and repeat the same comparison there.
If the speed gap is small and changes from run to run, you are probably seeing normal Wi‑Fi variation. If the gap stays the same in one room but not another, placement or roaming is more likely than a laptop fault. If the gap is there even when both laptops are beside the same node, the slower laptop itself is the stronger suspect.
What each laptop is really connected to
The SSID name alone does not tell you much. You need to know which band, which node, and which link each laptop is actually using.
On Windows, open the Wi‑Fi connection details and look for the band or frequency, the link speed, and the adapter name. Check whether one laptop is on 2.4 GHz while the other is on 5 GHz or 6 GHz, because that alone can explain a large speed difference. Also check whether the slower laptop is attached to a different Deco node, especially one that reaches the main unit over a weaker wireless backhaul path.
If Deco steering puts the two laptops on different bands, that does not automatically mean something is wrong. Band steering is meant to move devices to the band that seems best at the time, but laptops do not all respond to it the same way.
What to look for in Windows
- The Wi‑Fi band or frequency in use
- The negotiated link speed
- The adapter model name
- Whether the connection changed when you moved to another room
If the slower laptop keeps jumping between bands or nodes, that is a strong clue that roaming behavior or placement is part of the problem.
What on the laptop can make one faster than the other
A laptop can be the bottleneck even when the mesh is fine. A newer Wi‑Fi adapter may support wider channels or newer Wi‑Fi standards, while an older one may not. Antenna design matters too, because two laptops with similar-looking Wi‑Fi icons can still behave very differently in the same room.
Driver quality matters more than most people expect. If the slower laptop has an outdated or buggy wireless driver, it can show poor roaming, weak band choice, or lower throughput than it should. Windows power-saving behavior can also hold a wireless adapter back, especially on a laptop that is trying to save battery.
If the slower machine is a work laptop with extra security software, that software can also make the measured speed look worse than the actual Wi‑Fi link. In that case, the mesh may be doing its job and the laptop is what is slowing the test down.
Safe fixes to try before you blame the Deco
- Update the slower laptop’s Wi‑Fi driver from the laptop maker or the adapter maker, then restart it and retest.
- Repeat the comparison with both laptops in the same room, side by side, and with background traffic paused.
- Recheck which band and which node each laptop is using so you can tell whether anything actually changed.
- Move both laptops closer to the Deco node you want to test and repeat the speed test there.
- If one laptop keeps choosing 2.4 GHz while the other stays on 5 GHz or 6 GHz, treat that as a band-choice problem before you change Deco settings.
- Only after those checks should you look at Deco-side changes such as node placement, backhaul quality, or channel width, and only change one setting at a time so you can reverse it if needed.
If the slower laptop stays slow in the same spot, on the same band, after a driver update and a clean retest, the problem is usually with the laptop. If the speed gap follows a room change or a different node, it points more to placement or roaming. If both laptops are slow only on one node, that points toward the Deco side, especially backhaul quality or node placement.
Verify the fix worked
Run the same side-by-side test again after each change. Both laptops should be tested in the same room, on the same SSID, with background activity still paused, so the comparison stays fair.
You want to see one of three outcomes: the speeds come closer together, the slower laptop improves after the driver or power setting change, or both laptops are still different but the gap now matches the band or node each one uses. If the result only improves when both laptops are beside the same node, the old problem was placement or roaming. If the slower laptop is still behind even when everything else is matched, that is the point where the laptop itself is the likely limit.
Frequently Asked Questions
When is a speed difference between two laptops on Deco actually normal?
A difference is normal when the laptops use different bands, different adapters, or different mesh nodes. It can also happen if one laptop has background traffic or a weaker antenna design. If both machines are tested side by side and still differ, that usually means the devices are not equivalent.
Should I change Deco settings before checking the laptops?
No. Check the laptops first, because driver issues, power-saving behavior, and background tasks are common causes. If both laptops look healthy and the gap tracks a specific room or node, then it makes sense to look at band steering, backhaul quality, or placement.