If your eero network works for internet access but phones, Macs, or PCs can’t see a shared printer, the usual problem is discovery, isolation, or a printer-sharing setting mismatch. The printer may still be on the LAN and reachable by IP, but hidden from AirPrint, Windows browsing, or a vendor app. Start by checking how the printer is connected, then test it by IP address before you change eero settings.
What you may be seeing
The usual sign is simple: the printer works for some tasks, but it does not appear in the Add Printer list, AirPrint sheet, or vendor app on one or more devices. Sometimes one Mac can print while another Mac cannot. Sometimes a Windows PC can see the printer by name but not add it.
That pattern usually means the printer is still alive on the local network, but discovery is failing. The network may be hiding devices from each other. The printer may also be on the guest network, or its sharing method may not match the way the device is looking for it.
A printer can be reachable on its IP address and still not show up automatically in a print dialog. In that case, the problem is more about discovery than basic connectivity.
Before you start
Before you touch router settings, identify how the printer is actually connected.
- If the printer is on Wi‑Fi, confirm it joined the same main eero network as the devices that need to print.
- If it is on Ethernet, confirm it is plugged into the printer and into the same local network through an eero node or a switch on that LAN.
- If it is shared over USB from a Mac or PC, the host computer has to stay awake, stay on the network, and keep sharing the printer.
This matters because the fix changes with the connection type. A Wi‑Fi printer advertises itself on the network. An Ethernet printer does the same over a wired LAN. A USB-shared printer is different: the host computer is the network presence, so if that computer sleeps or leaves the network, everyone else loses the printer.
If the printer panel or setup page can show the connected SSID or IP address, check that first. If the printer has no valid IP address, stop there and fix the connection before you change anything on eero.
The safest fix order on an eero network
- Confirm the printer is not on the guest network. Guest access is meant to keep devices apart, so a printer placed there may be invisible to normal home devices. If the printer supports moving to the main network, reconnect it there first. If it was set up on the wrong SSID, fix that before changing router settings.
- Check that the printer has a live IP address on your local network. Look in the eero app’s device list if the printer appears there, or check the printer’s own network status page if it has one. If the printer has no IP address, or an address that does not fit your local network, it is not ready to be discovered yet.
- Test the printer by IP address from a second device. Use the printer’s IP address directly from a browser or from the operating system’s add-printer flow, depending on the device you’re using. If the printer responds by IP, you’ve separated reachability from discovery. If it does not respond, keep working on the printer’s connection instead of changing sharing settings.
- Restart the printer first, then the eero node it uses only if needed. A reboot can refresh the printer’s network advertising, including Bonjour, mDNS, or SMB announcements. In practice, this is one of the safest fixes because it is reversible and does not change your network setup.
- Check the sharing method that matches the device you are using. AirPrint depends on Bonjour and mDNS discovery on the local network. Windows shared printers depend on Windows sharing and SMB behavior. Vendor apps may use their own discovery path and can sometimes still find a printer that the operating system misses. If one method works and another doesn’t, the printer is probably reachable but not advertising itself in the way that client expects.
- Compare the current official eero and printer docs before changing advanced settings. Menu labels and printer options can move between app releases and firmware updates. Check the current official eero support pages and the printer maker’s current setup or sharing docs before you change anything more invasive. That is safer than guessing where a setting moved.
If the printer itself cannot join the network, check its driver or firmware update path from the printer maker first. If the printer is on an eero 6 or eero Pro 6 network and the problem is that a device cannot even detect the Wi‑Fi network, eero’s Legacy Mode is the temporary compatibility step they document. That is a separate problem from printer discovery, so use it only when the device cannot see the network at all.
The safest order is: main network first, then IP reachability, then a restart, then discovery and sharing settings. That keeps you from breaking a working setup while chasing the wrong layer.
How to tell whether the printer is actually reachable
Use the IP address test to separate discovery problems from network problems.
If you can reach the printer by IP, the LAN path is probably fine and the remaining issue is discovery or name resolution. If you cannot reach it by IP, stop treating it like a printer-sharing problem and go back to the printer’s network connection.
A printer can be reachable on the LAN and still not appear in the list you expect. That is why I treat the IP test as the dividing line. It tells you whether you need to fix the network path or the way the printer advertises itself.
After the fix, confirm that the printer responds from a device that was not used to set it up. If the printer has a web page or status page, it should load from another device on the same network. If it does not, the fix is not complete yet.
What to do when one device can see the printer but another cannot
When one device can print and another cannot, don’t assume the printer is broken. That usually means the devices are using different discovery rules.
On Mac and iPhone, AirPrint should show the printer in the system print dialog if Bonjour discovery is working. On Windows, a shared printer may show up through Windows browsing or when you add it by IP, but not through a vendor app. Some vendor apps can still see a printer even when the operating system cannot, which is a clue that the printer itself is fine but the discovery path is different.
If only one device can print, compare three things: whether that device is on the main network, whether it is using the printer by name or by IP, and whether it is relying on the vendor app instead of the system print dialog. That usually tells you which layer is still off.
For a USB-shared printer, check the host computer again. If that computer sleeps, disconnects from the network, or loses printer sharing, every other device will lose the printer too. That is the first place I would look if one machine still works and the rest do not.
How to confirm the fix worked
The fix is real only when the printer shows up and prints from a second device without special handling.
Check two things: discovery and printing. Discovery means the printer appears by name or in the Add Printer list. Printing means a test page or ordinary document actually comes out of the printer.
Then check it from at least one device that did not help configure the printer. On Mac and iPhone, the printer should appear in the normal print dialog through AirPrint or Bonjour. On Windows, it should be addable or selectable on the LAN, not just remembered from the old setup.
If the printer only works by IP but not by name, the LAN is fine and the remaining issue is usually Bonjour, mDNS, or SMB discovery. If it only works on the host machine that shares it, the host’s sharing setting or sleep behavior is still the problem. If it fails from every device after the checks above, compare the current eero app guidance and the printer maker’s current setup documentation before changing anything else.
Frequently Asked Questions
Why can one device see the printer but another cannot?
That usually means the printer is reachable on the LAN, but each device is using a different discovery method. AirPrint, Windows sharing, and vendor apps do not all look for printers the same way. So one device may find it while another misses it.
Should I use the printer vendor app or the system print dialog?
Use both for testing, but trust the system print dialog first. If the vendor app sees the printer and the OS does not, the printer may be reachable but not advertising itself through AirPrint, Bonjour, or SMB in the way your device expects.